Recording from a DAT into Pro Tools or Peak via the O2R
To digitally
record from one of the Panasonic SV3700 DAT machines into the O2R and then pass
the signals through to Protools or Peak for recording to hard disk, do the
following:
EMS
II only: On the digital patchbay, patch from DAT OUT to 2TR D1 IN. (In EMS III,
the DAT machine is already hard-wired to the 2TR D1 Input of the O2R.)
On
the digital I/O page of the O2R:
- Set the Word clock to originate from the 2TR
D1 (cursor to the box and highlight, then press Enter)
- Set Line 17/18 to be 2TR-IN D1
- Set MIC 1-8 to CARD SLOT 3.
On
the Routing Page of the O2R:
- Set channels 17/18 to bus outs 1/2*. This
will automatically route it to Pro Tools IN 1/2*
- Take channels 17/18 OFF the stereo bus.
Turn
on input channels 17/18 and bring up faders.
Set
Pro Tools to record on channels 1/2*.
On
the O2R, turn on the input channels 1/2* and bring up the faders.
Hit
record in Pro Tools ...
* - change as
needed for recording on tracks other than 1/2.
Using Pro Tools with the O2R | O2R Overview | Using the Eventide DSP 4000 from the O2R | Documentation Index
Revised 8/31/2005 by RP